Portable Wireless AP/Router
Chapter 8 DHCP Server
DHCP server is for the WISP mode and wireless Router
mode.
8.1 DHCP Settings
DHCP (Dynamic Host Control Protocol) is to assign an IP
address to the computers on the LAN/private network.
When you enable the DHCP Server, the DHCP Server will
allocate automatically an unused IP address from the IP
address pool to the requesting computer in premise of
activating “Obtain an IP Address Automatically”. So
specifying the starting and ending address of the IP Address
pool is needed.
² DHCP Server: Activate the checkbox to enable
DHCP server.
² IP Address Start: Enter the range of IP address pool for
To Next Page
Loading...
