Portable Wireless AP/Router
² Primary DNS Sever: Input the primary DNS sever
provided by your ISP.
² Secondary DNS Sever: you can input it or empty it.
The parameters are also provided by your ISP
² Host Name: The device’s wins name which you can
use it to visit the device.
Notice: Once you changed the IP address of the LAN port,
you should use the new IP to enter into the Web interface.
6.2 WAN Settings
WAN setting is only for WISP mode and Wireless Router
mode.
6.2.1 ADSL Virtual Dial-up (via PPPoE)
To Next Page
Loading...
Need help?
General
