Portable Wireless AP/Router
² Enable Click this to enable the policy.
² Filter Mode: Click one radio button to enable or
disable to access the Internet in specific time. Every
rule is applicable only to the corresponding MAC
address.
² Policy Name: Enter a name for the access policy
selected.
² MAC Address: Enter the MAC address of the
computer you want to run the access policy.
² Times: Select the time range of client filter.
² Date: Select the day(s) to run the access policy.
² Apply: Select Apply to enable the settings.
For example:
If you want to configure the host with MAC address
00:22:15:55:2A:15 not to access the Internet at 9 00-18
00 from Monday to Friday, you need to set it as above.
10.4 Prevent Network Attack
This section is to protect the internal network from exotic
attack such as SYN Flooding attack, Smurf attack, LAND
attack, etc. Once detecting the unknown attack, the Router
will restrict its bandwidth automatically. The attacker’s IP
To Next Page
Loading...
Need help?
General
