Portable Wireless AP/Router
Click “Next” to save configurations.
Note: We suggest you do not change the channel in this
mode, or else you can not access the device which you
want to connect.
For wireless network encryption, please refer to 7.2.
Set the computer to“Obtain IP address automatically” to
access the internet. More details refer to Appendix I.
5.5 Wireless Router Mode
In this mode, the device can connect to the DSL modem,
Cable modem such broadband devices or the broadband
cable directly.
Note: In this mode, the LAN/WAN port is worked as the
WAN port. After it takes effect, only the computers with
wireless network adapter can access the web-based
interface of the router.
Log on the web-based interface as chapter 4 and then
configure the mode as below.
5.5.1. Select “Wireless Router”, click “Setup Wizard” and
“Next” button.
To Next Page
Loading...
