Portable Wireless AP/Router
connect with the AP with
auto-negotiation speed.
² SSID SSID (Service Set Identifier) is the unique
name of the wireless network. Wireless client must
input the same SSID as the device to access.
² Channel: Specify the effective channel (from 1 to
13\Auto) of the wireless network.
² Broadcast (SSID): Select “Disable” to disable the
device’s SSID to be invisible by the wireless client. If
you disable it, client must input the same SSID as the
device to access.
² BSSID: Basic Service Set Identifier of wireless
network. In IEEE802.11, BSSID is the MAC address
of wireless access point.
² Extend Channel To increase data throughput of
wireless network, the extension channel range is used
in 11n mode.
² Channel Bandwidth Select the channel bandwidth
to improve the wireless performance. When the
network has 11b/g and 11n clients, you can select the
40M; when it is an 11n network, select 20/40M to
improve its throughput.
To Next Page
Loading...
Need help?
General
