Tenda W150M - Wireless Access Control

Portable Wireless AP/Router
7.5 Wireless Access Control
To secure your wireless LAN, the wireless access control is
actually based on the MAC address management to allow
or block the specific clients to access the wireless network.
Select “WLAN Setting->Access Control” to display the
following screen:
² MAC Address Filter Allow/Block MAC address
filter. Select “off” to mal-function MAC address;
“Block” to prevent the MAC addresses in the list from
accessing the wireless network; “Allow” to allow the
MAC address in the list to access the wireless
network.
² MAC Address Management Input the MAC address