Portable Wireless AP/Router
Start MSC process means the process has been started
and waits for being connected. Configured means the
negotiation is successful between server and clients.
² WPS Configured “yes” means WPS feature is
enabled and goes into effect. “Not used” means it is
not used. Usually the AP-security has been enabled,
here will displayed “not used”.
² WPS SSID Show the main SSID set by WPS.
² WPS Auth. Mode The authorization mode deployed
by WPS, generally WPA/WPA2-personal mode.
² WPS Encrypt Type The encryption type used by
WPS, generally AES/TKIP.
² WPS key The effective key generated by AP
automatically.
² AP PIN KEY The PIN code used by default.
² Reset OOB When this button is pressed, the WPS
client will be idle state, and WPS indicator will be
turned off. AP will not respond the WPS client’s
requests.