Portable Wireless AP/Router
must be the same as the terminal device.
² Encrypt Type: The encrypt type security mode you set
should be the same as the terminal device. More
details please refer to the Wireless Security Settings
chapter.
We recommend you “Scan” the access points and then
select the SSID in your scanned SSID list for convenience.
Click “Next” to the following interface.
5.3.3. Wireless Basic Setting
² Network Mode Select one mode from the following.
The default is 11b/g/n mode.
11b mode Allow the wireless client to connect with
the device in 11b mode at the maximum
speed of 11Mbps.
To Next Page
Loading...
Need help?
General
