Portable Wireless AP/Router
² Service Name: It is defined as a set of characteristics
that are applied to a PPPoE connection. Enter it if
provided. Do NOT modify it unless necessary.
² AC Name: Enter it if provided. Do NOT modify it
unless necessary.
² Connect Automatically: Connect automatically to the
Internet after rebooting the system or connection
failure.
² Connect Manually: Connect to the Internet by users
manually.
² Connect on Demand: Re-establish your connection to
the Internet after the specific time (Max Idle Time).
Zero means your Internet connection at all time.
Otherwise, enter the minutes to be elapsed before you
want to disconnect the Internet access.
² Connect on Fixed Time: Connect to the Internet
during the time you fix.
Notice:
The “Connect on Fixed Time” can be deployed only
when you have set the current time in “Time Settings”
from “System Tools”.
To Next Page
Loading...
Need help?
General
