Portable Wireless AP/Router
wireless client to connect 11n wireless network
smoothly in a complicated wireless area.
² Basic Data Rates: For different requirement, you can
select one of the suitable Basic Data Rates. Here,
default value is (1-2-5.5.-11Mbps…). It is
recommended not to modify this value.
² Beacon Interval: Set the beacon interval of wireless
radio. Default value is 100. It is recommended not to
modify this value.
² Fragment Threshold: The fragmentation threshold
defines the maximum transmission packet size in
bytes. The packet will be fragmented if the arrival is
bigger than the threshold setting. The default size is
2346 bytes. It is recommended not to modify this
value.
² RTS Threshold: RTS stands for “Request to send”.
This parameter controls what size data packet the
frequency protocol issues to RTS packet. The default
value of the attribute is 2346. It is recommended not to
modify this value in SOHO environment.
² TX Power: Set the output power of wireless radio. The
default value is 100.
To Next Page
Loading...
Need help?
General
