Portable Wireless AP/Router
² Enable: Check to enable remote web management.
² Port: The management port open to outside access.
² WAN IP Address: Specify the range of the WAN IP
address for remote management.
Note
1. If you want to login to the Web-based interface via
port 8080, you need use the format of WAN IP
address: port (for example http
//220.135.211.56:8080) to implement remote login.
2. If your WAN IP address starts and ends with 0.0.0.0,
it means all hosts in WAN can implement remote Web
management. If you change the WAN IP address as
218.88.93.33-218.88.93.35, then only the IP addresses
as 218.88.93.33, 218.88.93.34 and 218.88.93.35 can
access the Router.
To Next Page
Loading...
Need help?
General
