Document version: V1.0
5
Step 7
Enter the PPPoE User name and Password provided by your ISP and click Connect.
---End
After the configuration is completed, you can access the internet on the computer.
◼
Configure internet access on a router
Assume that your ISP provides you with the PPPoE user name and password.
Step 1
Configure the ONT.
Step 2
Connect the WAN port of router to a LAN port of the ONT using an Ethernet cable.
Step 3
Refer to the quick installation guide or user guide of your router to configure the internet
access.
---End
After the configuration is completed, you can access the internet through the router.
To Next Page
Loading...