Document version: V1.0
7
Step 6
Click Apply Changes.
---End
After the configuration is completed, you can access the internet through the LAN port of the ONT,
or by connecting a router (connection type: DHCP/dynamic IP) to a LAN port of the ONT.
Set up a dynamic IP connection
If your ISP does not provide any parameters, you can try to set up a DHCP connection.
Step 1
Log in to the web UI of the ONT.
Step 2
Navigate to WAN > WAN > PON WAN.
Step 3
Set Channel Mode to IPoE.
Step 4
Set other common WAN parameters as required by your ISP.
To Next Page
Loading...