Teo 4101 - Page 26

Teo IP Phone 4101 Installation Instructions
Page 26 13-280135 Rev. K
P
P
h
h
o
o
n
n
e
e
P
P
o
o
r
r
t
t
s
s
You can view or edit the phone's SIP port and RTP (Real-Time Protocol) start port from this
menu.
From the port menu, select SIP or RTP.
Select VIEW if you want to view the port number without making any
changes.
Select EDIT to change the port number.
Edit the port number with the dial pad.
Character entry is explained on page 14.
For most SIP implementations, use the default port numbers:
SIP – 5060
RTP – 16384
Press the
ENTER key when finished.
NETWORK>PORT>SIP
VIEW
NETWORK>PORT
SIP