Tera 2I386EW - Chapter 3 Connection; List of Connectors

25
CBT1: CMOS battery 1x2 pin (1.25mm) wafer
CA3: Line-out / Line-in / Mic-in 2x5 pin (2.0mm) Wafer (OEM)
CALR1: Amplifi er Line-out Right / Left channel 4pin (1.25mm) wafer (OEM)
CC1 : COM1 DB9 Connector
CC2 : COM 2x5pin (2.0mm) wafer
CC3 : COM 2x5pin (2.0mm) wafer
CC4 : COM 2x5pin (2.0mm) wafer
CFP1: Front Panel connector 2x5pin (2.0mm) wafer
CG1: VGA DB15 Connector
CIO1: 4DI / 4DO 2x5 pin (2.0mm) Wafer
CL1 : LAN port 1 RJ45 Connector
CL2 : LAN port 2 RJ45 Connector
CL11 : LAN port 1 RJ45 2x4 pin (2.0mm) wafer (OEM)
CL21 : LAN port 2 RJ45 2x4 pin (2.0mm) wafer (OEM)
CO1: I2C Bus 4pin (1.25mm) Wafer
CPI1: DC 12V-IN 1x4 pin (2.0mm) Red wafer connector
CPP1: Panel inverter power connector 1x5 pin (2.0mm) wafer
CPO1: +12V / +5V power output 4 pin (2.0mm) Black wafer connector
CT1: Touch screen device 2x5 pin (2.0mm) Wafer (OEM)
CU1: USB3.0 / 2.0 Dual port Type A connector
CU2: USB2.0 Dual port Type A connector
CU3: USB 2.0 port 4pin (1.25mm) Wafer
CU4: USB 2.0 port 4pin (1.25mm) Wafer
CU11: USB 2.0 port 4pin (1.25mm) Wafer
LVDS1: LVDS 2x15 pin (1.25mm) connector (OEM)
SATA1: One SATA connector 7pin
Chapter-3
3-1 List of Connectors
Connection
This chapter provides all necessary information of the peripheral's connections,
switches and indicators. Always power off the board before you install the peripherals.