Tera 2I386EW - LVDS1: LVDS INTERFACE (2 X15 PIN 1.25 MM WAFER)

To Next Page

To Previous Page

3-16 LVDS1

LVDS interface (2x15 pin 1.25mm wafer) (OEM)

PIN NO. DESCRIPTION PIN NO. DESCRIPTION

1 PWM dimming 2 +5V

3 +LCD(5V or 3.3V) 4 +LCD(5V or 3.3V)

5 Channel-1-DATA3+ 6 Channel-0-DATA3+

7 Channel-1-DATA3- 8 Channel-0-DATA3-

9 Channel-0-DATA2+ 10 Channel-0-CLK+

11 Channel-0-DATA2- 12 Channel-0-CLK-

13 GND 14 GND

15 Channel-0-DATA1+ 16 Channel-0-DATA0+

17 Channel-0-DATA1- 18 Channel-0-DATA0-

19 GND 20 GND

21 +LCD(5V or 3.3V) 22 +LCD(5V or 3.3V)

23 Channel-1-DATA2+ 24 Channel-1-CLK+

25 Channel-1-DATA2- 26 Channel-1-CLK-

27 Channel-1-DATA1+ 28 Channel-1-DATA0+

29 Channel-1-DATA1- 30 Channel-1-DATA0-

Note

1. LVDS interface support 18 / 24bits two channel.

2. JVL1: LVDS panel +5V / +3.3V (default) Voltage select.

3. LVDS1 PIN 1 for panel backlight active.

4. Pin 1 back light dimming control. Provided 200Hz / 275Hz / 380 Hz / 20KHz /

25KHz and adjust PWM duty cycle by software program.

LVDS1

pin1