Tescom CL115D Series - Adjust Menu; Options Menu

20
ADJUST MENU ____________________________________________________________
The submenu items of this menu and their functions are described in the service manual of the CL115D series
UPS. Please refer to this document.
OPTIONS MENU ____________________________________________________________
This menu contains user adjustable operating modes, options and parameters. These are as follows:
LANG: ENGLISH or TURKISH
This option determines the front panel language of the UPS.
OP.MODE: ONLINE or OFFLINE
OPTION DESCRIPTION
ONLINE Online operating mode is selected and the load is continuously connected to the inverter output
OFFLINE
The load is connected to bypass input while bypass input voltage is in tolerances. If bypass
input voltage is out of tolerance, the load will be transferred to the inverter output.
RESTART: ON or OFF
OPTION
DESCRIPTION
ON
After battery autonomy
-
end
, following the mains restoration UPS
restart
s
automatically
.
OFF After battery autonomy-end, following the mains restoration the user should restart the UPS.
REMOTE: ON / OFF (REMOTE CONTROL FROM RS232: on/off)
This option enables or disables the remote control of UPS through its serial port.
OPTION DESCRIPTION
ON The control options of UPS is enabled from serial port (login required)
OFF The control options of UPS is disabled from serial port (read only)
BATT.TEST: ON or OFF
This option enables or disables the automatic battery test function of the UPS.
OPTION DESCRIPTION
ON
Automatic battery test every 72 hours. (first test will be done after 8 hours following the power
on)
OFF UPS cancels automatic battery test
BOOST: ON or OFF
This option anables or disables the boost charge function of the UPS
OPTION DESCRIPTION
ON
From command menu user can start boost ch
arge for 10 hours
OFF Command menu boost charge start function is disabled
CHARGE+PFC: NO or YES
This option determines charger will run together with PFC system or stand alone charger system.
OPTION DESCRIPTION
NO Charger runs independent from PFC system
YES
If the PFC system stops the charger will stop too. If PFC system starts the charger will start
again.
DATA:RS232 or ADAPTOR
Advanced data adaptor is internal type or external type.
OPTION DESCRIPTION
RS232 RS232 port selection for data transfer
ADAPTOR Optional adaptor selection for data transfer