Tescom CL115D Series - VI. Technical Specifications; Model; Input; Output

31
VI. TECHNICAL SPECIFICATIONS
MODEL
CL115D
Output (VA) 15000
Output (KW) 10500
Output Power Factor 0.7
INPUT
Number of Phases 1 phase + neutral
Input Voltage 220/230/240 VAC (3 wire)
Input Voltage Range
(without switching to battery power)
170-275V adjustable
Input Power Factor (PF) >0.99 at full load
Input THDI <5% at full load
Input Frequency 50 Hz nominal
Input frequency tolerance 40-65 Hz
By-pass Voltage 220/230/240 VAC, +/-10% (adjustable)
By-pass Frequency 50 Hz
By-pass Frequency Tolerance
(for synchronization)
Adjustable between +/- 1.0 and 3.0 Hz
RFI Level EN62040
Split By-pass Connection OPTIONAL
Input power connections Hardwired from the rear
Maintenance bypass switch OPTIONAL
OUTPUT
Number of phases 1 phase + neutral + earth (3 wire)
Output Voltage 220/230/240 VAC (3 wire) user selectable
Output Voltage Tolerance +/- 1%
Output Frequency 50 Hz
Output Frequency Tolerance (line synchronous) Adjustable between +/-1.0 and 3.0 Hz
Output Frequency Tolerance (free running) 0.01%
Load Crest Factor 3:1
Output Voltage THD <3%
Overload
Less than 100% continuous
100%-125% for 10 minutes (adjustable)
126%-150% for 1 minute (adjustable)
Output connections Hardwired+2Xiec sockets on the rear side
Weight 41 kgs