TESTO Saveris H2D radio probe - Connecting USB Cable to the Saveris Base (Optional)

5 First steps
32
Pos: 46 /TD/Erst e Schritte/testo Saver is/01 USB-Kabel an Base ansc hließen @ 0\mod_11902 10196906_79.docx @ 4930 @ 2 @ 1
5.3. Connecting USB cable to the Saveris base
(optional)
1. Loosen and remove screw connection.
2. Remove cover from Saveris Base.
3. Plug the USB cable into the Saveris base.