TESTO Saveris H2D radio probe - Connecting Router with Power Supply (Mains Unit)

5 First steps
45
Pos: 64 /TD/Erst e Schritte/testo Saver is/Hardware erwei tern/01 a Router einbinden/ 01 Router-Strom @ 1\mod_11 97548324640_79.doc x @ 6294 @ 4 @ 1
5.11.1.1. Connecting router with power supply (mains unit)
1. Open cover .
2. Insert mains cable .
3. Insert mains plug into a socket.
The wall mounting of a router is performed in the same
ways as for a probe; see "Mounting the probe on the
wall".