Tevion 82663 - Navigating the Menus; Cancel Function; Select Mode or Device

Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 82663
7
Standard display – time
In the standard display:
 the active mode appears in the first column (device type).
 the day of the week and time appears in the second column.
Date
Press the SETUP key briefly
1
to show:
 the symbol for the activated SHIFT function
2
(S) in the first
column;
 the date in the second column.
Please read “Setting time and date” on page 8 for more information on setting the
time and date.
Select mode or device
Use a mode key to select the mode or the device that was programmed to this mode
key. In the display:
 the name of the mode key appears in the first column;
 this device's programmed code appears in the second column.
Please refer to “Programming device codes” on page 10 for
more information on programming the device code.
Navigating the menus 7
 To open the Setup menu, press and hold the SETUP key until CODE SETUP appears
along with the SET symbol in the display.
 If the display shows
CODE SETUP continue to press the SETUP key to access the other
menus:
CODE SETUP > SYSTEM SETUP > TIMER SETUP > LEARN SETUP > MACRO SETUP > EXIT
SETUP
.
 Press OK to open a menu.
 Press the arrows to switch between sub-menus .
 To exit the Setup menu, press the EXIT key and confirm the
EXIT SETUP display with
OK.
Cancel function
If you wish to cancel a process, wait approx. 30 seconds. The
Setup menu closes automatically and the
TIMEOUT message
appears.
1
Press and hold the SETUP key to open the CODE SETUP(see next chapter).
2
Most keys can be assigned two functions (cf. Page 18). You can access the
second function by first activating the SHIFT function.