Helpline No. UK/ North Ireland 0871 37 61 020 Rep. Ireland 1-800-992 508
Web Support www.medion.co.uk
Model Number: 82663
10
Programming device codes 10
For every device that you would like to operate using the universal remote control,
you must program a four-digit device code to a mode key (TV, VCR, DVD, CD,
ASAT, ASAT, CBL, AUX). The names on the keys are only for reminder purposes.
With the exception of the TV key you can assign any key to any device (“Flex Mode”).
The TV mode key can only be assigned to TV device codes.
Your universal remote control is pre-programmed with proprietary codes from Tevion
devices and its most important functions can be used with proprietary Tevion devices
without requiring any extra programming.
Device types and code groups
You can choose between the following device types when programming in codes:
TV TV set, projector, plasma screen, LCD;
VCR Video recorder;
LD Laser disc player;
DVD DVD player;
DVR Digital video recorder;
HDD Hard disk drive;
SAT Satellite receivers (analogue, digital);
CABLE Cable box, Pay TV decoder;
DVBT DVB-T receivers;
STB Set top box;
AUDIO Audio device;
AMP Amplifier;
RECR Receiver (combined radio and amplifier);
HTIB Home Cinema;
MP3 MP3 player;
CD CD player;
TAPE Cassette players;
TUNER Radio;
PHONO Record player.
Assigment to code groups
Each type of device is assigned to a group of device codes. When you select a device
type, the appropriate code group is searched to find a device code. Device types are
assigned as follows:
Device type Code group
TV TV
VCR, LD, DVD, DVR, HDD, HTIB VCR/DVD
SAT, CABLE, DVB-T, STB, CBL/SAT
AUDIO, AMP, RECR, MP3, CD, TAPE, TUNER, PHONO,
HTIB (some)
CD/AUDIO
To Next Page
Loading...
