www.ti.com
BP-ADS7128 EVM Initial Setup
11
SBAU331–May 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
BP-ADS7128 BoosterPack™ Plug-In Module
3.3 ADS7128 GUI Description
3.3.1 Description
Figure 10 shows the landing page of the ADS7128 GUI. This page provides a high-level overview of the
ADS7128 device. The left corner shows the tabs to navigate through the GUI: home, function
configurations, data capture, and register map. When the BP-ADS7128 is stacked on the MSP432E401Y
and connected to the PC via the micro USB cable, the GUI detects the BoosterPack™ module by reading
the onboard EEPROM. When detected and connected, the GUI indicates this status as connected. At the
bottom left corner of the GUI, there is an option to connect and disconnect the hardware from the GUI.
Figure 10. ADS7128 GUI Landing Page
To Next Page
Loading...
