www.ti.com
Hardware
7
SLAU680–May 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
MSP430FR2355 LaunchPad™ Development Kit (MSP
‑
EXP430FR2355)
2.2 Hardware Features
2.2.1 MSP430FR2355 MCU
The MSP430FR2355 is an ultra-low-power MSP430FRx FRAM-based microcontroller (MCU), which offer
extended data logging and security capabilities. The MSP430FR2355 offers the small LQFP package (7
mm × 7 mm) in the FRAM microcontroller portfolio, combined with a variety of integrated peripherals and
ultra-low power consumption. FRAM is a cutting edge memory technology, combining the best features of
flash and RAM into one nonvolatile memory. More information on FRAM can be found at www.ti.com/fram.
Device features include:
• 1.8-V to 3.6-V operation
• 16-Bit RISC architecture up to 24-MHz system clock and 8-MHz FRAM access
• 32KB of Program FRAM, 512 bytes of Information FRAM, and 4KB of RAM
• 12-channel 12-bit ADC
• Two enhanced comparator with integrated 6-bit DAC as reference voltage
• Four Smart Analog Combo (SAC-L3)
• Three 16-bit timers with three capture/compare registers (Timer_B3)
• One 16-bit timer with seven capture/compare registers (Timer_B7)
• 32-bit hardware multiplier (MPY)
• 44 GPIOs
To Next Page