Texas Instruments ti nspire cx

58 Configuring the TI-Nspire™ CX handheld
Customizing the handheld setup
Handheld setup options enable you to customize options to suit your
needs.
• Font size (small, medium, or large)
• Power standby. (1, 3, 5, 10, or 30 minutes)
– Use this option to extend battery life
– By default, the handheld automatically powers down after three
minutes of inactivity.
• Hibernate (1, 2, 3, 4, 5 days, or never)
– Use this option to extend battery life.
– By default, the handheld hibernates after four days.
– When hibernating, the handheld saves current work in memory.
– When you turn the handheld on again, the system reboots and
opens saved work.
• Pointer speed (slow, normal, or fast)
• Auto dim (30, 60, or 90 seconds and two or five minutes)
• Enable tapping to click
Changing Handheld Setup options
1. From the Home screen, press 53. The Handheld Setup dialog box
opens.
2. Press
e until the desired category is highlighted.
3. Press
¢ to view the list of possible settings.
4. Press
6 to highlight the desired setting.