Texas Instruments ti nspire cx Getting Started Guide

Configuring the TI-Nspire™ CX handheld 59
5. Press x or · to select the new setting.
6. When you have changed all the settings to suit your needs, press
e until OK is highlighted, then press x or · to apply your
changes.
Note: Click
Restore to return the handheld to the factory settings.
Customizing General settings
General settings control how the handheld displays and interprets
information in TI-Nspire™ documents and in Scratchpad. All numbers,
including elements of matrices and lists, are displayed according to the
general settings. You can change the default settings at anytime and you
can also specify settings for a particular document.
General settings and their possible values are listed in the following
table.
Field Values
Display Digits Float
Float1 - Float12
Fix0 - Fix12
Angle Radian
Degree
Gradian
Exponential Format Normal
Scientific
Engineering
Real or Complex Real
Rectangular
Polar

Texas Instruments ti nspire cx Specifications

General

Power	Rechargeable lithium-ion battery
Operating System	TI-Nspire OS
Programming Support	TI-Basic, Lua
Display	320 x 240 pixel color display (3.2 inch diagonal)
Connectivity	USB
Memory	100 MB storage memory
Processor	150 MHz ARM9
Dimensions	7.5 x 3.4 x 0.8 inches
Graphing Capabilities	3D graphing