Texas Instruments ti nspire cx Getting Started Guide

Connecting handhelds and transferring files 73
Connecting handhelds and transferring
files
This chapter describes how to connect one TI-Nspire™ handheld to
another, how to connect handhelds to a computer, and how to transfer
files between them.
The TI-Nspire™ handhelds have a USB port that enables connectivity with
another TI-Nspire™ handheld or with a computer.
Note: When using the TI-Nspire™ TI-84 Plus keypad, you can connect
with another TI-Nspire™ handheld using the TI-Nspire™ TI-84 Plus
keypad or a TI-84 Plus using the USB port or the I/O port.
Connecting handhelds
Using USB cables
You can use USB cables to connect two TI-Nspire™ handhelds, to connect
a TI-Nspire™ handheld to a computer, or to connect one TI-Nspire™
handheld using TI-Nspire™ TI-84 Plus keypad to another.
Connecting two TI-Nspire™ handhelds with the mini-USB
cable
You can connect two handhelds as long as both handhelds are using the
same keypad. You cannot connect a handheld using the TI-Nspire™ TI-84
Plus keypad to a handheld using the native TI-Nspire™ keypad.
TI-Nspire™ USB connection
cable to connect handheld to
a computer.
TI-Nspire™ handheld mini-USB
cable to connect two
TI-Nspire™ handhelds.

Texas Instruments ti nspire cx Specifications

General

Power	Rechargeable lithium-ion battery
Operating System	TI-Nspire OS
Programming Support	TI-Basic, Lua
Display	320 x 240 pixel color display (3.2 inch diagonal)
Connectivity	USB
Memory	100 MB storage memory
Processor	150 MHz ARM9
Dimensions	7.5 x 3.4 x 0.8 inches
Graphing Capabilities	3D graphing