Texas Instruments ti nspire cx Getting Started Guide

70 Configuring the TI-Nspire™ CX handheld
Attaching a wireless cradle to a handheld
The wireless cradles can also be used with all TI-Nspire™ handhelds to
wirelessly connect to the teacher’s computer. To connect a handheld to a
wireless cradle:
1. Slide the lock on the back of the cradle to the OFF position.
2. To attach the handheld, face the screen upward and slide the
handheld onto the top of the TI-Nspire™ Navigator™ wireless cradle.
Be sure that both sides of the handheld are inserted into both of the
side guides
.
3. Press firmly to make a good connection. When properly connected,
the TI-Nspire™ CX handheld appears to be sitting on top of the
cradle.
Lock in OFF position.

Texas Instruments ti nspire cx Specifications

General

Power	Rechargeable lithium-ion battery
Operating System	TI-Nspire OS
Programming Support	TI-Basic, Lua
Display	320 x 240 pixel color display (3.2 inch diagonal)
Connectivity	USB
Memory	100 MB storage memory
Processor	150 MHz ARM9
Dimensions	7.5 x 3.4 x 0.8 inches
Graphing Capabilities	3D graphing