Texas Instruments TMS320F28069

140
TMS320F28069 , TMS320F28068 , TMS320F28067 , TMS320F28066
TMS320F28065, TMS320F28064, TMS320F28063, TMS320F28062
SPRS698F –NOVEMBER 2010–REVISED MARCH 2016 www.ti.com
Submit Documentation Feedback
Product Folder Links: TMS320F28069 TMS320F28068 TMS320F28067 TMS320F28066 TMS320F28065
TMS320F28064 TMS320F28063 TMS320F28062
Detailed Description Copyright © 2010–2016, Texas Instruments Incorporated
6.9.13.1 eQEP Electrical Data/Timing
Table 6-68 shows the eQEP timing requirement and Table 6-69 shows the eQEP switching
characteristics.
(1) For an explanation of the input qualifier parameters, see Table 6-76.
(2) Refer to the TMS320F28069, TMS320F28068, TMS320F28067, TMS320F28066, TMS320F28065, TMS320F28064, TMS320F28063,
TMS320F28062 Piccolo MCUs Silicon Errata (SPRZ342) for limitations in the asynchronous mode.
Table 6-68. Enhanced Quadrature Encoder Pulse (eQEP) Timing Requirements
(1)
MIN MAX UNIT
t
w(QEPP)
QEP input period
Asynchronous
(2)
/Synchronous 2t
c(SCO)
cycles
With input qualifier 2[1t
c(SCO)
+ t
w(IQSW)
]
t
w(INDEXH)
QEP Index Input High time
Asynchronous
(2)
/Synchronous 2t
c(SCO)
cycles
With input qualifier 2t
c(SCO)
+t
w(IQSW)
t
w(INDEXL)
QEP Index Input Low time
Asynchronous
(2)
/Synchronous 2t
c(SCO)
cycles
With input qualifier 2t
c(SCO)
+ t
w(IQSW)
t
w(STROBH)
QEP Strobe High time
Asynchronous
(2)
/Synchronous 2t
c(SCO)
cycles
With input qualifier 2t
c(SCO)
+ t
w(IQSW)
t
w(STROBL)
QEP Strobe Input Low time
Asynchronous
(2)
/Synchronous 2t
c(SCO)
cycles
With input qualifier 2t
c(SCO)
+t
w(IQSW)
Table 6-69. eQEP Switching Characteristics
over recommended operating conditions (unless otherwise noted)
PARAMETER MIN MAX UNIT
t
d(CNTR)xin
Delay time, external clock to counter increment 4t
c(SCO)
cycles
t
d(PCS-OUT)QEP
Delay time, QEP input edge to position compare sync output 6t
c(SCO)
cycles