Textron Bell 212 - Page 213

BHT-212-MM-1
5-00-00
Page 178 Rev. 14 26 JUN 2013
Export Classification C, ECCN EAR99
f. Two scissors tube to scissors bolts P/N 20-057-5-27D.
g. Two pitch link to universal tube bolts P/N 20-057-6-27D.
h. Two drive link to rotating swashplate bolts P/N
20-057-5-30D.
i. Two pitch horn to pitch link bolts P/N 20-057-6-31D.
j. Two universal to mixing lever bolts P/N 20-057-6-34D.
k. Four mixing lever 204-011-301, pivot bolts P/N
20-057-6S20D.
l. Four 20-057-6S24D mixing lever 212-010-302, pivot
bolts P/N 20-057-6S23D or 20-057-6S24D.
m. Two scissors to drive link bolts P/N 20-057-8S69D.
n. Two scissors 204-011-406, pivot bolts P/N
20-057-8S90D.
o. Two stabilizer bar pivot bolts P/N 20-057-10S27D or
20-057-10S29D.
p. Three hydraulic cylinder to lower support bolts P/N
212-001-304-003 or 212-001-323-001.
q. Two scissors 212-010-407, pivot bolts P/N
212-010-411-005 or 212-010-411-003-001 (ASB 212-89-56).
r. Two stabilizer bar damper tube to damper wing shaft
bolts P/N AN174-15.
s. Two stabilizer bar damper tube to stabilizer bar bolts
P/N AN174-20.
t. Two collective lever to swashplate support bolts P/N
AN178-22A.
2. Clean bolts with cloth dampened with MEK (C-309).
SPECIAL INSPECTIONS
5-46. EACH 24 MONTHS OF FLIGHT CONTROL SYSTEM BOLT OPERATION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER