BHT-212-MM-1
5-00-00
Export Classification C, ECCN EAR99
3. Inspect bolts for thread damage, shank wear, and
corrosion. Replace any bolt that has damaged threads,
detectable shank wear, or exhibits corrosion pitting.
Chapter 67 4. Apply corrosion preventive compound (C-104) to shanks of
bolts only and install bolts.
5. After bolts have been installed and nuts torqued and
safetied, coat head of bolt, nuts, and lockwire with corrosion
preventive compound (C-101).
5-46. EACH 24 MONTHS OF FLIGHT CONTROL SYSTEM BOLT OPERATION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
26 JUN 2013 Rev. 14 Page 179/180
To Next Page
Loading...
