AS 680/682
Installation and Setup Description, Operation and Maintenance
ADS−B
3−22 Ed. 10.07
3.4 CONFIGURATION OF RCMS/LCMS
The configuration of the RCMS/LCMS is located in the directory /usr/local/etc . Each ADS−B
application will get its configuration from this location.
The configuration consist of the following files:
Configuration file
ADS−B application
recordasx.cfg ARC – Asterix recorder
recordraw.cfg RRC – Raw Data Recorder
replayasx.cfg ARP – Asterix Replayer
recordrawreplayasx.cfg RAC – Raw Data To Asterix Converter
recordrawreplayraw.cfg RRP – Raw Data Replayer
display.xml TSD – Technical Situation Display
gs_list.conf TSC − Technical System Control
data.xml MTSC− Master Technical System Control
3.4.1 Default Configuration
After installation of the RCMS/LCMS, a default configuration exists in the directory /usr/local/etc.
3.4.2 Site−specific Configuration
To get a site−specific configuration it is recommended to install a configuration package, e.g. for the
site ’Aena’ the package ’adsb_cfg_aena’ has to be installed.
The configuration package consists of site−specific configuration files for the ADS−B applications.
After installation, all applications will use this specific configuration. After de−installation of the config-
uration package the default configuration will be used again.
To Next Page
Loading...