4-23
User Manual PN 84469 Rev B
Once the initial Wi-Fi WPA2 Security Key is entered, it can be
changed at any time by just overwriting the current Security Key
in the SETTINGS Wi-Fi WIRELESS GENERAL area.
NOTE
To identify a device’s MAC address for whitelisting, you should
be able to find it in your device’s Settings menu. Sometimes it
is called the Wi-Fi Address. If it can’t be found, a simple way is
that while the Device Whitelist is DISABLED, connect the
device to be whitelisted to the Wi-Fi system by selecting the
correct Wi-Fi Network (SSID) and typing in the Security Code if
WPA2 is enabled. Once connected, go to STATUS
CURRENT DEVICES menu item and find the device Hostname
in the list of Allocated IPs. The MAC address will be in the left
LAN
This is an ADMIN functional only. If the user sees this icon,
login as the ADMIN to continue. Otherwise this is a view only
screen.
The LAN page, shown in Figure 4-26, allows PoE to be enabled or disabled on the three LAN
ports and DHCP to be enabled and configured or disabled. Each LAN port PoE is Class 2 and
capable of providing up to 6.5 watts of power to the connected device. See Table 4-7 for more
information on the information that is entered.
To Next Page
