2.2.2 Work on the refrigerant circuit
Caution All warranties from Thermia are void if, when filling with refrigerant
other than Thermia specified refrigerant, if there has not been written
notification that the new refrigerant is an approved replacement re-
frigerant together with other remedies.
Draining and refilling must only be carried out using new refrigerant (for the amount and type of refrigerant see manufacturer’s plate)
through the service valves.
2.2.3 Scrapping
Caution When the heat pump has reached end-of-life and is subject to scrap-
ping, it should be sent to a recycling/treatment facility to ensure cor-
rect handling of disassembly, recycling, and disposal. Local rules and
regulations related to correct extraction and disposal of refrigerant
and compressor oil must be followed.
In the case of a need to empty the water in the water tank, follow the instructions below:
1. Turn off the power
2. Turn off the water supply from the main water line
3. Empty the tank from the top using a siphon hose
Installation Guide
Athena
AWAT01IGCG0102 Thermia AB
10
To Next Page
Loading...
Need help?
General
