Thermo Scientific DensityPRO-T - Page 52

Ordering Information
Code Detector Mounting DensityPRO DensityPRO-T
N No Selection
• •
B Base Plate Mount
5, 6
• •
W Base Plate Mount, Water-Cooled
5, 7
• •
Code Detector Mounting Hardware DensityPRO DensityPRO-T
0 No Selection
• •
1.5 Pipe Saddle for 1.5" or 2.0" Pipes
• •
XX
8
Pipe Saddle for 3 – 16" Pipes
Available pipe sizes, in inches: 3, 4, 5, 6, 8, 10, 12, 14 and 16
• •
XX
8
Pipe Saddle for 18 – 42" Pipes
Available pipe sizes, in inches: 18, 20, 22, 24, 26, 28, 30, 36 and 42
• •
Code Accessories DensityPRO DensityPRO-T
N No Selection
• •
S Large SS Tag, 3.3” x 2.5”, Wired
• •
G1 Detector Supporting Gusset Kit, Integrated Detector
G2 Detector Supporting Gusset Kit, Integrated Water-Cooled Detector
5
If Selected, Pipe Saddle with Correct Size Required
6
For Explosion-Proof and NEMA 4X Options
7
For Explosion-Proof with Water-Cooled Detector Option
8
Use Pipe Size In Place of XX in Code
Figure A-1. Sample Order Format
A-2 DensityPRO Installation Manual Thermo Scientific