EPD/HB/40521/000
ISSUE 5
EPD TECHNICAL HANDBOOK Page 50
the EPD reverts to normal display. There is also an inhibit timer that prevents an
EPD from re-establishing communications immediately after communications are
completed. This gives the user time to remove the EPD from the IR field. The EPD
continues to measure radiation during communication. Communication via the
EPD’s IR communications link will allow access to the following EPD functions and
displays:
♦ Default Display
♦ User Identification
♦ Dose and Dose Rate
♦ Alarms and Alarm Thresholds
♦ Counts
♦ Dose Quality
♦ Control of the EPD
♦ Status
♦ Scratch Pad
♦ Timed Events
♦ Dose Profile
♦ Special Total Dose Store
♦ ADS Issue
♦ Calibration Parameters
To Next Page