EPD/HB/40521/000
ISSUE 5
EPD TECHNICAL HANDBOOK Page 61
SECTION 5
EPD FAULTS and RECOVERY ACTIONS
5.1 Overview
This section identifies the fault conditions that can occur and describes the recovery
procedure (if any) to be taken to restore the EPD to operational use.
The section is organised as follows:
1. Fault indication via sounder, alarm Led, LCD.
2. Internal logging of fault conditions.
3. Blank display and other “uncontrolled” faults.
4. Communications Error over the IR link.
5. LCD Display error codes.
6. Recovery Procedures.
To Next Page
Loading...
