EPD/HB/40521/000
ISSUE 5
EPD TECHNICAL HANDBOOK Page 69
5.7 LCD Display Error Codes
Faults that exhibit a known condition are normally indicated on the EPD LCD as âFâ
followed by a 3-digit error. The error code number is also logged in the Event History
store, with date/time data. As an example the following shows fault F095:
A list of EPD error codes is given in Table 5.2. They are divided into blocks
according to the software module that generates them.
Epd Action
This describes what the EPD does in addition to attempting to display the
fault and record the fault in the event history store.
To Next Page
Loading...
Need help?
General
