Thermo SAFE 2010 - Starter; Electrical Spare Parts

SAFE 2010/MaxiSAFE 2010
INSTRUCTION MANUAL
Page 33 of 35
81-09-IM.doc
11.6. Starter
Figure 12.
Equipment required
Starter.
Procedure for starter replacement
1. Remove the reflector.
2. Replace the starter in the right fitting.
11.7. Electrical spare parts
Cabinet size 0.9 1.2 1.5 1.8
Fluorescent lamp 30-36-58W/83 844035
844027 844028
UV light tube type TUV 15-30W 844030
844031
Starter for both FSU 4-80W 844086
G-fuse 5x20 mm T 10A, 250 Volts 841274
G-fuse 5x20 mm T 6.3A, 250 Volts 88851096
G-fuse 5x20 mm T 1A, 250 Volts 88851097