Page 4 / 35
INSTRUCTION MANUAL
SAFE 2010/MaxiSAFE 2010
81-09-IM.doc
1. Introduction
You are now in possession of a high quality microprocessor-controlled Class II cabinet, Holten
SAFE 2010/MaxiSAFE 2010, designed to provide protection of the operator, the environment, and
the processed product against particle-/microbiological contamination.
The cabinet complies with the requirements stipulated in EN 12469 for SAFE 2010 and DIN 12980
for MaxiSAFE 2010. In chapter 4 you can see the options and sizes of approved cabinets.
• The Holten
SAFE 2010/MaxiSAFE 2010 Class II cabinet is/has:
• Microprocessor controller with.
• LCD display indicating fan and alarm status.
• Air velocity (filter service) indicator.
• Clock (7 days) and hour-counter.
• Pre-setting of automatic start-up and UV–timer.
• Alarm for any deviation from safety conditions.
• Ergonomically correct sloping front for maximum operator comfort.
• Motor-driven, double-function front window, with both sliding and hinged modes.
• Side windows, for perfect light conditions and view to the surroundings.
• Negative pressure plenum for highest operator and product safety.
• Key switch to prevent unauthorised starting and stopping of the fan.
• Adjustable FAN speeds. Gives you the opportunity to select FAN off, reduced, or normal air
velocity.
2. Safety precautions
• To avoid unintended or improper operation of the cabinet, please carefully read this manual.
• Also, please pay attention to the short form operating instructions on the label stuck on the
cabinet.
• If you have questions related to the function or control of the cabinet or wish to order spare
parts, please always indicate type and production number from the nameplate on the right
side of the cabinet.
WARNING
The proper function and safety of the cabinet are only secured if personnel
authorised by us to do so perform the required tests, maintenance and repair work.
Please also refer to sections ”Testing” and ”Maintenance”.
The following precautions must be taken for operation of the Holten
SAFE 2010/
MaxiSAFE 2010.
To Next Page
Loading...
Need help?
General