SAFE 2010/MaxiSAFE 2010
INSTRUCTION MANUAL
Page 7 of 35
81-09-IM.doc
• The trough will collect and hold any spillage of fluids. A drain valve can be installed
(Standard on MaxiSAFE 2010).
• The installation zones in the back wall can be equipped with electric outlets and a UV-light
fixture.
• The side windows come with holes for installation of valves.
• The stainless steel modular tabletop is easily removed for cleaning.
• The internal light is installed on the front of the work chamber outside the front window. This
secures that the light is glare-free and will cause neither turbulence nor unwanted heating
inside the work chamber.
• Arm rest for air intake efficiency.
Options:
• UV light integrated in the back wall behind a small door.
• Protective ground sockets 230V ∼ / 4A installed in the back wall.
• Valves for various gasses i.e. gas, nitrogen (N
2
) vacuum, or Carbon dioxide (CO
2
), a
maximum of 3 installed in each side window.
• Exhaust valve for connection to the exhaust system – consult your dealer for detailed
information.
• Double HEPA-filter exhaust system as specified by BS 5726-(92).
Please contact our sales department for information regarding other available options.
To Next Page
Loading...