Warnings, safety, and warranty information
WARNING: Read and understand this guide before servicing
the equipment.
The Thermo Scientific
™
HyPerforma
™
DynaDrive Single-Use Bioreactor (S.U.B.) is
designed to be operated under traditional eukaryotic cell culture conditions. A general
understanding of bioreactor systems and their operation is important prior to using
the system for the first time. Read and understand this user’s guide before operating;
failure to do so could result in injury and potential loss of product. Only trained operators
should be allowed to operate the equipment.
WARNING: Hazardous voltage inside.
The agitation motor, motor controller, and electrical control panel (E-Box)
all have electrical components. There is a risk of electrical shock and injury.
Disconnect power before opening electrical components. Service should be
performed by certified personnel only.
Please note any electrical hazard labels on the equipment. Thermo Fisher Scientific
recommends using standard lockout procedures when working on electrical
components. The main switch on the E-Box may be locked out.
WARNING: Rotating parts—entanglement hazard.
Rotating and moving parts can cause injury. Keep hands away from moving parts
during operation.
• Do not operate this equipment unless the supplied guarding is in place and
properly functioning.
• It is the responsibility of the end user to assess this equipment and ensure that
equipment and safeguards are in good working condition, and that all operators are
trained and aware of entanglement hazards and associated protective devices, such
as hazard signs and guarding.
WARNING: Follow lockout/tagout procedures.
To prevent injury, when servicing equipment, use your company’s lockout/tagout
procedures to isolate electrical, mechanical, pneumatic, hydraulic, chemical, thermal,
gravitational, or any other potential energy and protect workers from the release of
hazardous energy.
WARNING: Hot surface. Do not touch.
The heating jacket is designed to heat the inner vessel wall. Normal operating conditions
generate heat, and could create hot surfaces.
• Hot surface inside
• Contact with surfaces may cause burns
• Do not touch while in operation
Warnings, safety, and warranty information
Thermo Scientific 1DynaDrive S.U.B. Service Guide
To Next Page
Loading...
