ThermoFisher Scientific HyPerforma DynaDrive - Additional Replacement Parts and Part Numbers; Installing Cable Management System

Chapter 3 | Replacing parts
Table 3.5. Additional replacement parts and part numbers.
Components Cat. no
50 L S.U.B. cable management system SV50992.01
500 L S.U.B. cable management clip SV51255.01
3,000 and 5,000 L S.U.B. cable management clip SV51245.16
50 L foam probe holder SV51253.01
500 L foam probe holder SV51253.02
3,000 and 5,000 L foam probe holder SV51245.19
Double probe clips SV51256.01
50 L BPC top tab holder SV51252.01
500 L BPC top tab holder SV51254.01
3,000 and 5,000 L large tubing hook assembly SV51245.05
3,000 and 5,000 L large tubing hook short part SV5124 5.15
3,000 and 5,000 L large tubing hook tall part SV51245.14
3.14. Additional replacement parts and part
numbers
The following table lists part numbers for replacing additional DynaDrive S.U.B. system
components.
3.14.1. Installing tubing management system
1. Clip the tubing management part in the desired location and orientation anywhere
along the vertical handle bar.
Note: The part will snap into place with a medium amount of force (Figure 3.90).
Figure 3.90. Tubing management system
clipped to the handle bar.
Thermo Scientific 51DynaDrive S.U.B. Service Guide