Contents
Contents
Warnings, safety, and warranty information 1
How to use this guide 4
Chapter 1. DynaDrive S.U.B. overview 5
Chapter 2. Servicing and preventive maintenance 9
2.1. Servicing checklists 10
2.2. Maintenance 10
2.2.1. Routine maintenance 10
2.2.2. Preventive maintenance 10
Chapter 3. Replacing parts 11
3.1. Replacement parts and part numbers 12
3.2. Replacing the S.U.B. common-jacket drain valve and
wing nut tri-clamp 13
3.2.1. Required parts and tools 13
3.2.2. Preparation 13
3.2.3. Replacement procedures 14
3.3. Replacing the 50 and 500 L quick-release pin 15
3.3.1. Required parts and tools 15
3.3.2. Replacement procedures 16
3.4. Replacing the 50 and 500 L assembly bottom hub clamp 17
3.4.1. Required parts and tools 17
3.4.2. Preparation 17
3.4.3. Replacement procedures 17
3.5. Replacing the IPM motor, BPC lift mechanism, and
hub locking mechanism 18
3.5.1. Required parts and tools 18
3.5.2. Preparation 18
3.6. Replacing the 50 and 500 L load cells 26
3.6.1. Required parts and tools 26
3.6.2. Preparation 26
3.6.3. Replacement procedures 29
Thermo Scientific
To Next Page
Loading...
