Removal steps of the NFC cable
Removal steps of the NFC module
When installing:
Ensure that the connectors are attached firmly.
1190 System board
Important notices for handling the system board
When handling the system board, read the following:
• The system board has an accelerometer, which can be broken when several thousands of G-forces are
applied.
Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench
can subject the accelerometer to as much as 6,000 G's of shock.
Chapter 8. Removing or replacing a FRU 85
To Next Page
Loading...
