Settings
49
6.3 Setting Advanced Driver Assistance Systems (ADAS)
The ADAS features explained in this section may not be available in some countries, and the setting menus
may be disabled, or may not be displayed at all.
You can activate or deactivate a safety camera alert system, a lane departure warning system (LDWS),
a forward collision warning system (FCWS), an urban forward collision warning system (uFCWS), a front
vehicle start alarm (FVSA), and a blind spot detection (BSD) system and set their options.
6.3.1 Setting the Safety camera alert feature
When the vehicle approaches or passes the speed limit zone, the safety camera alert system will collect
GPS signals and safety camera data. Refer to the following instructions to enable or disable this feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road safety settings, and then tap the
Setting button next to Safety Camera Alert under Safety Camera Alert System.
2
You can switch the button to ON or OFF to activate or deactivate the feature. The new setting is applied
to the system as soon as a change is made.
6.3.2 Identifying the vehicle type
Refer to the following instructions to identify your vehicle type for using the ADAS feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road safety settings.
2
Tap the Setting button next to Vehicle type under Road Safety Warning System and select Sedan, SUV,
or Truck (Bus). The new setting is applied to the system as soon as a change is made.
6.3.3 Setting the ADAS settings (auto calibration)
To enhance the ADAS feature's accuracy, follow the instructions to set the alignment on the ADAS settings
screen.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road safety settings. Tap the View
button next to ADAS settings under Road Safety Warning System.
2
Adjust the product position to align the blue line displayed on the ADAS settings screen with the
center of the hood and the green line just above the hood.
After positioning the product, drive at 30 km/h for more than 1 minute to finish the alignment.
To Next Page
Loading...
