Settings
51
6.3.7 Setting the forward collision detection sensitivity
When the vehicle drives at 30 km/h or above, the FCWS will detect forward collision danger via the real-
time video image and warn the driver. Refer to the following instructions to set the detection sensitivity or
activate or deactivate this feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road safety settings, and then tap the
Setting button next to FCWS (Forward Collision Warning) under Road Safety Warning System.
2
Switch the button to Low, Mid, or High to set the detection sensitivity, or OFF to deactivate the feature.
The new setting is applied to the system as soon as a change is made.
6.3.8 Setting the urban forward collision warning system (uFCWS)
When the vehicle drives at 30 km/h or lower, the uFCWS will detect forward collision danger via the real-
time video image and warn the driver. Refer to the following instructions to set the detection sensitivity or
activate or deactivate this feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road safety settings, and then tap the
button next to FCWS (Low Speed) under Road Safety Warning System.
2
Switch the button to Low, Mid, or High to set the detection sensitivity, or OFF to deactivate the feature.
The new setting is applied to the system as soon as a change is made.
6.3.9 Setting front vehicle departure warning
When the vehicle is stopped in traffic, this feature will detect the departure of the vehicle in front and notify
the driver. Refer to the following instructions to enable or disable this feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road safety settings, and then tap the
Setting button next to FVDW (Front Vehicle Departure Warning) under Road Safety Warning System.
2
Switch the button to ON or OFF to activate or deactivate the feature. The new setting is applied to the
system as soon as a change is made.
To Next Page
Loading...
