Settings
50
6.3.4 Setting the lane departure warning feature
When the vehicle departs its lane, the LDWS will detect the lane departure via the real-time video image
and warn the driver. Refer to the following instructions to set the detection sensitivity or activate or
deactivate this feature.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road safety settings, and then tap the
button next to LDWS (Lane Departure Warning) under Road Safety Warning System.
2
Switch the button to Low, Mid, or High to set the detection sensitivity, or OFF to deactivate the feature.
The new setting is applied to the system as soon as a change is made.
6.3.5 Initializing the lane departure warning feature
Refer to the following instructions to initialize the lane departure warning guide lines.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road safety settings, and then tap the
button next to Initialize LDWS under Road Safety Warning System.
2
Tap OK on the confirmation screen. The lane departure warning guide lines will be initialized.
6.3.6 Setting the lane departure detection speed (LDWS speed)
You can change the lane departure detection speed. Refer to the following instructions to set the lane
departure detection speed.
1
On the Live view screen, tap the Home button ( )
>
Settings
>
Road safety settings, and then tap the
button next to LDWS speed under Road Safety Warning System.
2
Switch the button to 50 km, 60 km, 70 km, or 80 km. The new setting is applied to the system as soon
as a change is made.
To Next Page
Loading...
