Thinkware T700 - Using Recording Features

19
3. Using recording features
3.1 Turning the product on or off
The product is turned on automatically and continuous recording starts when you turn on the ACC or start
the engine.
Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).
3.2 Learning about the LED indicator status and file storage locations
Refer to the following information to learn about the LED indicator status and file storage locations.
Viewing the LED indicator status
You can check the operation status of the product on the LED indicator on the front of the product.
For more information about the operation status of
the product according to the LED indicator, refer
to how to use each recording mode (continuous
recording, continuous incident recording, manual
recording, parking mode, and SOS recording).
Viewing the file storage location
Videos are stored in the following folders according to their recording mode.
On the mobile
viewer
Continuous
Continuous
Incident
Manual
Recording
Motion
Detection
Parking
Incident
SOS
recording
In the memory
card
cont_rec evt_rec manual_rec
motion_
timelapse_rec
parking_rec sos_rec
Play videos on Window/Mac computer or using the THINKWARE mobile applications. If you play videos by
inserting the memory card in devices such as a smartphone or a tablet PC, the video files may be lost.
A file name is composed of the recording start date and time, and the recording option.
REC_2020_07_01_10_25_30_
F.MP4
REC_2020_07_01_10_25_30_R.MP4
REC_2019_07_01_10_25_30_GS.MP4
Recording conditions
• F: Front camera
• R: Rear camera