Using recording features
22
Option Operation description LTE LED
Energy
Saving
No impact
detected
Monitors impacts to the vehicle. Video will be recorded
only when an impact is detected.
LED off
Impact
detected
When an impact is detected while parking, a video is
recorded for 20 seconds (from within 1 second after
detection) and stored in the "parking_rec" folder.
OFF The product is powered off when electric accessories and the engine are turned off.
If parking mode settings are changed, the videos recorded with the previous settings will be deleted. To
prevent data loss, back up all parking mode videos before changing parking mode settings.
• If the nano SIM is not connected, the LTE status indicator will be red.
• You cannot use Motion Detection, Time Lapse, or Energy Saving at the same time.
3.6 Using the SOS recording feature
You can record a scene when an accident occurs while driving or parked and store it as a separate file.
To start SOS recording, press the SOS button. Then, the voice guide will indicate that SOS recording has
started.
During SOS recording, the product operates as follows.
Mode Operation description LTE/Wi-Fi LED
SOS recording
If you press the SOS button when an accident occurs, a
video will be recorded for 10 seconds (from 5 seconds
before the accident to 5 seconds after pressing the button)
and stored in the "sos_rec" folder.
(flickers)
According to the data service policy, if you have used all of the SOS recording upload usage times, pressing
the SOS button will save the recorded video to the SD card, but may not upload it to the THINKWARE
CONNECTED LTE application. Visit THINWARE website (https://www.thinkware.com) for more information.
To Next Page
Loading...
